Dual Methods of Disinfection - The Strava Splint Bath is the only splint bath on the market designed with two built-in methods of disinfection. This ensures optimal patient safety and meets regulatory compliance standards.
Smart Model Features - The Smart model incorporates cutting-edge technology to enhance efficiency and convenience. Water circulates through an ultraviolet-C germicidal-kill light at 254nm, widely used to disinfect drinking water. This ensures thorough and effective disinfection of splints. Additionally, the Smart model automatically preheats the water to reach a set temperature at a set time any day of the week, ensuring that it's ready for patient use when your clinic opens. This feature not only saves time but also promotes energy efficiency by heating only when necessary.
Even Heating Distribution - Traditional splint baths often suffer from thermal lag, uneven heating, and inaccurate temperatures due to wire-wound heating elements. In contrast, the Strava Splint Bath features a unique internal heat exchanger immersed directly in the circulating-water basin. This design ensures fast heating, minimal thermal lag, and uniform heat distribution, heating up in less than 25 minutes with even distribution.
Accurate Temperature Control - With an internal temperature control system, the Strava Splint Bath allows real-time temperature monitoring at extremely close tolerances (+/- 2° F). This ensures that the water temperature remains accurate and consistent, providing optimal comfort for patients.
We are confident that the Strava Splint Bath will revolutionize your clinic's splint care procedures, offering unparalleled safety, efficiency, and patient comfort.
Strava BASIC Features:
Automatic On/Off
Heats in 25 Minutes
User Sets Time & Temp
Visual Timer
Temperature Display
Audible/Visual Alerts
Digital Touch Interface
Low Water Sensor
Bi-Fold Stainless Steel Lid
Rapid Water Evacuation
Strava SMART
All the Basic features plus:
UVC Effective Sterilization
Water Circulation System
Dual Disinfection
UVC Germicidal Kill
High Heat Sanitation Cycle
Thermoplastic Presets
Custom Presets
Dual Filtration
BASIC Features:
Automatic On/Off
Heats in 25 Minutes
User Sets Time & Temp
Visual Timer
Temperature Display
Audible/Visual Alerts
Digital Touch Interface
Low Water Sensor
Bi-Fold Stainless Steel Lid
Rapid Water Evacuation
Specifications:
Operating Temperature Range: 140 - 180 F / 60 - 82 C
Temperature Variability: 2 degrees
Sanitation Mode: 185 F
Set Time: 30 – 180 Seconds
Over Voltage: 11W
Frequency: 50/60 Hz
Mains Voltage (+/- 10% of nominal voltage): 100-120 VAC, 200-240 VAC
Power Consumption: 1100W
AC Current (Max): 12 amps
Water Fill Capacity: 5.2 G / 20 L
Water Fill Height: 5” / 12.5 cm
Unit Weight: 35 lbs / 15.9 kg
Unit Dims Outer (LxWxH): 22.625”L 19.75”W 10”H / 60cm L 52cm W 25.5cm H
Unit Dims Inner (LxWxH): 19”L 12”W 6”H / 48cm L 30cm W 15cm H
Unit Shipping Weight: 47 lbs / 21 kg
Unit Shipping Dims (LxWxH): 26.5”L 23”W 16”H / 67cm L 59cm W 41cm H
Environment (Altitude) - Operation (Max): 16,732 ft / 5100 m
Storage (Altitude): 16,732 ft / 5100 m
Over 1 million Customers
